1, Install the batteries correctly or connect the light to the adapter (5V output)
2, Push the switch on the light to ON position to switch the light on.
3, The light will be on white color in medium brightness,the motion sensor works.
4, Keeping moving in the scale of 120 degree 3 meters, the light will not turn off.
5, The light will turn off automatically in 30 seconds if no motion is detected.
6, Remove the protective plastic tab from battery compartment on IR remote control before use it.
7, Change colors or mode settings by pressing the buttons on the remote controller while pointing to the face of the light.
8, Press OFF button to switch the control to motion sensor.
9, When press the OFF button, the lights will be on white color if the motion sensor detects motions.
10, When press the OFF button, the lights will be off if the montion sensor detects no motions.
11, To turn the light off by pushing the switch on the lights to the position of OFF.
12, Use an adapter to charge the bettery inside or as power supply, the output of the adapter is 5V.
13, The battery is fully charged when the blue indicator is off.
14, The adapter will not charge the AAA batteries in the battery compartment.