Instructions:
Ⅰ. Use the built-in Lithium battery:
1. Take out the light from the package and put it on flat place.
2. Press the red button on the light to switch the light on standby.
3. Remove the insulating strip from the battery compartment of the remote.
4. Direct the controller towards the light face to press ON to turn on the light.
5. Press one of the color buttons for solid color.
6. Press downward arrow to decrease the brightness of solid color, and press upward arrow to make brighter.
7. Press FADE and the light rotation will seamlessly blend from color to color.
8. Press JUMP and the tones will rotate by jumping from color to color.
9. Press RESET to return the light to brightest red solid color.
10. Press OFF to turn the light off. And please press the red button again on the light to cut off the power supply.
Ⅱ. Use 3 AAA batteries:
1. Remove the battery compartment at the reverse base
2. Insert 3 AAA batteries into the compartment according to the polarity shown and replace compartment
3. Go steps as Ⅰ.1--Ⅰ.10 to use the light
Ⅲ. Use AC adapter:
1. Request an adapter with 5V & 2 AH output
2. Connect the cable to the adapter and the light and plug the adapter to the outlet
3. Go steps as Ⅰ.1--Ⅰ.10 to use the light
4. If the red indicator is on, the built-in Lithium is being charged; if the green indicator is on, the battery charging is completed.
Note: The AC adapter can only charge the built-in Lithium battery. The 3 AA batteries in the battery box will not be charged through the adapter.
We can use the light while charging the built-in Lithium battery.